Glass splashbacks
Bespoke glass splashbacks, made to measure in a range of colours, toughened for behind your hob and cut to fit your kitchen exactly. Designed and fitted across Scotland.
Made to measure, down to the millimetre
Every kitchen is different, so nothing we make is off the shelf. You send us your measurements, or we template the wall for you, and we cut each glass splashback to fit your worktop, sockets and corners precisely. We allow for plug points, switches and hob cut-outs so the finished panel sits flush against the wall. Standard panels are 6mm toughened safety glass, the thickness recommended for behind a cooker or hob.
A range of colours or a printed finish
Because the colour is applied to the back of the glass, your splashback keeps its depth and shine for years and will not fade behind a busy hob. Choose from:
Coloured glass splashbacks matched to almost any shade, including any RAL or paint colour you are already using in the room
Printed image splashbacks, so you can put a photo or pattern behind your hob
Printed splashbacks with a photo, pattern or texture printed behind the glass
Popular colours and finishes
Because the colour sits behind the glass, it keeps its depth and shine for years and will not fade, even behind a busy hob. Every panel is toughened safety glass, so it is built for the heat of a kitchen as well as the look. These are the choices customers reach for most:
Send us a photo and we will match your colour
Not sure which shade you need? Message a photo to us on WhatsApp or via the online form and we will match your splashback to it.
Glass That Fits First Time
Your splashbacks and glass fit first time, with no gaps behind the hob. We measure on site with a digital templating tool that captures every size, angle and out of square wall, then cut your glass to match exactly. Few local firms work this way.
Where glass splashbacks work
Wipe-clean, waterproof and grout-free, a glass splashback suits any room that takes splashes and steam.
Kitchen
Behind worktops, hobs and cookers, the classic glass splashback spot.
Bathroom
Around basins, baths and showers, fully waterproof and wipe clean.
Utility rooms
A hard-wearing, grout-free panel behind sinks and worktops.
Feature wall
A full wall of glass between the counter and units for a seamless look.
How we work with you
We measure
Send us your sizes, or book a template visit so we get every cut-out right.
Choose your finish
Pick your colour or printed design and your sockets and fixings.
Made to spec
Each panel is cut, polished and made to your spec.
Delivered & fitted
We deliver across Scotland, with supply-and-fit available locally.
Glass splashback reviews from our customers
Kitchens we've fitted across Scotland
Why people choose AJ Glass
No middlemen, no subcontractors. We make your glass in our own Falkirk factory and fit it ourselves, the same way we have since 1990.
Made in our own factory
35 years, family-run
Fitted by our own team
Glass splashback questions
The things we're asked most, answered straight.
Yes. The glass is toughened, so it is made to sit behind gas, electric and induction hobs and take the heat of everyday cooking.
In most cases, yes. If your current tiles are flat and sound, we can fit the splashback straight over them, which saves the mess and cost of taking them off first.
Glass is one seamless panel with no grout lines, so it wipes clean in seconds and never goes mouldy. It looks richer than acrylic and lasts far longer. Tiles can cost less up front but more in fitting and upkeep.
No. The colour is sealed behind the glass, so it cannot be scratched off or fade in sunlight, even right behind a busy hob. The surface you touch is simply toughened glass.
Yes. We print your photo or pattern straight onto the glass. Send us your own image, or tell us the look you are after and we will help you find one from a stock image library. We check the resolution will hold up at full size before anything is printed, so the finished panel stays sharp.
That is normal in most kitchens. We template the wall before we cut, so the panel is made to fit the space you actually have, not a perfect one.
It is bonded to the wall with a strong adhesive and sealed neatly at the edges. No drilling through the glass and very little dust, and most splashbacks go in within a single visit.
Send your rough sizes and a photo through the form below, or give us a call, and we will come back with a quote. The consultation is free and there is no call-out fee.
Most jobs are measured, made in our own factory and fitted within a few weeks of your order being confirmed. We will give you a clear timescale when you order.
Yes. We supply and fit across central Scotland, and we can make a splashback to your sizes and deliver it.
Still need an answer?
Ring us or send a message.
Get a free quote
Tell us what you need, we'll take it from there